LED Neon DMX Controller

It can support DMX console and input for AC100~240V to operate.

I. Summarization

   High-voltage DMX controller with LCD display is a kind of controller with LCD digital display interface, used for control the RGB color change of 4 line 3 channels(common anode) LED lamps, up to 34kinds of change programs to choose, at the same time can accept DMX-512 international standard digital control. Controller can be stand-alone operation, automatically online, accept standard DMX512 console control signal etc. method to work. According to the customer's actual demand, can achieve jumpy changing, gradual changing, stroboscopic such change effect.

II. Technical Parameters

  ● Working temperature: -20-60℃

  ● Power supply voltage: AC 100～240V  50/60HZ

  ● Output voltage: DC 100～240V

  ● Output connect way: common anode 4 line 3 channels

  ● External dimension: L203ΧW134ΧH50 mm

  ● Packing size: L310ΧW170ΧH60 mm

  ● Net weight: 0.77kg

  ● Gross weight: 1.22kg

  ● Static power consumption: <3.96w< p="">

  ● Maximum output current: 3*2A

  ● Dimming frequence: 800Hz

  ● Maximum output power: 660W(input voltage 110V), 1320W（input voltage 220V）

Direction for use

1. Connect the load wire at first, following by the power wire; Please ensure short circuit

  can not occur between connecting wire before you turn on the power.

  Controller have 4 function setting key: MODE, PARA, UP, DOWN.

2. MODE key choose in turn or press UP, DOWN key to choose:

No.	Display content	Instruction
0	BLACK	Static black
1	STATIC  RED	Static red
2	STATIC  GREEN	Static green
3	STATIC  BLUE	Static blue
4	STATIC  YELLOW	Static yellow
5	STATIC  PURPLE	Static purple
6	STATIC  CYAN	Static cyan
7	STATIC  WHITE	Static white
8	COLOR  CHANGE	Seven color jumpy changing
9	COLOR  CHANGE2	Jumpy changing (flicker)
10	SIX  COLOR CHANGE	Six color jumpy changing
11	SIX  COLOR CHANGE2	Jumpy changing (flicker)
12	RGB  CHANGE	Three color jumpy changing
13	RGB  CHANGE2	Jumpy changing (flicker)
14	RG  CHANGE	RG jumpy changing
15	RB  CHANGE	RB jumpy changing
16	GB  CHANGE	GB jumpy changing
17	WHITE  CHANGE	White stroboflash
18	COLOR  SMOOTH	Seven color gradual changing
19	4 COLOR  SMOOTH	Four color gradual changing
20	RG  SMOOTH	RG gradual changing
21	RB  SMOOTH	RB gradual changing
22	GB  SMOOTH	GB gradual changing
23	COLOR  GRADUAL	Seven color fade in and out
24	RGB  GRADUAL	Three color fade in and out
25	WHITE  GRADUAL	White fade in and out
26	RG  GRADUAL	RG fade in and out
27	RB  GRADUAL	RB fade in and out
28	GB  GRADUAL	GB fade in and out
29	R  GRADUAL	R fade in and out
30	G  GRADUAL	G fade in and out
31	B  GRADUAL	B fade in and out
32	ADJUST  MODE	0-255 level adjusted color
33	AUTO  PROGRAM	Auto operation selecting result of changing
34	DMX512  MODE	DMX512 control order
35	DMX512  DECODER	DMX512 decoder

3. Press PARA to adjust in turn: (1－8 is static state, do not have adjust function)

No.	Parameters display	Instruction
		Maximum	Minimum
1	RUN  SPEED	100	0
2	RUN  TIMES	100	0
3	LOAD DEFAULT	Restore the factory parameter

4. UP: increase parameter key/preset parameter.

5. DOWN: decrease parameter/preset parameter.  

6. AUTO PROGRAM mode is repeatedly cycle running part or all of 6-31 patterns run,you can set whether participating in repeated cycle of operation or not in RUN TIMES.

7. RUN TIMES: compiling the run times of the pattern under 33 AUTO PROGRAM, if the run times is 0, you can skip the pattern,that means not running the pattern.

8. Preset parameter: each form has independent factory preset parameter, which is kept in controller separate. LOAD DEFAULT can recover the factory parameter of the form. If under AUTO PROGRAM mode, using LOAD DEFAULT can unified recover the parameter of all forms to factory parameter.

9. 32 ADJUST MODE is manual dimming, it can adjust the brightness of RGB 0-256 level respectively.

10. 34 DMX512 MODE is controlling all patterns (the first address) and speed（the second address).

11. 35 DMX512 DECODER is DMX decoder, completely accepting outside DMX512 signal to work. Taking 4 addresses, R(the first address), G(the second address), B(the third address), reserved channel(the fourth channel), in need of setting address（by pressing PARA).