LED Digital Controller SZ500

TechnicalParameters :

Interface Specifications:

1.      Connecting the load well wire at first,plugging in the SD card,connectingthe power wire at last; please ensure that no shortcircuit phenomenon between the cable before turn on the power.

P.S.: thedigital will display “0000” If the SD card is not plugged in well, pleaseunplug the power cord first and re-inserted the SD card, turn on the poweragain after the recheck.

2.      the description of the buttons on theController panel:

1)       On/off：It can open or close output.

2)       Mode/Speed ：Mode adjustment / speed adjustment functionswitch (The first LED displays H for model adjustment, shows S for the speedadjustment.)

3)       UP：Mode+/Speed+ button. When in mode regulator function, itis for “Mode+”. When in speed regulator function, it is for “Speed+”.

4)       DOWN：Mode-/Speed-button. When in mode regulator function, it is for “Mode-”. When in speedregulator function, it is for “Speed-”.

5)       How to set the auto mode? Aswe know, automatic cycle mode is very important in this product. Users can set this mode in detail asbelow:

a)   Automatic cycle mode is the lastmode, “UP” and “UP”in mode regulator function, we will reach the automaticcycle mode, as the digital display “A000”.

b)   In the automatic cycle mode, the “mode/ speed”can be used to set the detail:

Press the “mode/speed”,the digital will display: “A000”, “『』***“or “S***”.

“A000” means: stillin the automatic cycle mode. Pressing the “UP”/”DOWN”,will exit the automatic cycle mode and enter the other mode.

“『』***“ means:in current automatic cycle mode, the number of cycles for each mode.

For example,“『』001“ means: each mode will play only one time in acycle process. Pressing the “UP”/”DOWN”, thenumber will be increased/decreased.

“S***” means thespeed of current automatic cycle mode, Pressing the “UP”/”DOWN”,the speed will be quick/slow. 

3.       SD Card

   The file extension is “.led” in the SD card.The SD Card need to be formatted as “FAT32” before storied the “.led” file.

Typical Applications:

Notes:

1.Supply voltage of this product is DC12V, never connect to others or AC220V.

2. WirelessRemote Control is powered by DC12V battery, if Stretch the antenna, it would Controlbetter.

3.Lead wire should be connected correctly according to grade that connectingdiagram offers.

4.If the load is more, by way of port 2 to connect the power will be better.

5.This product can not to overload.

6.Warrantyof this product is one year, but exclude the artificial situation of damaged oroverload working.