LED Digital Controller A01

Model: LG-LCD12/24V-A01

This Wireless Remote LED Controller is for UCS1903 (TM1804 etc) output applications which drive LED directly. It is widely used in advertising, stage sets, home decorations, etc. It has many advantages such as low price, easy connection and simplicity to use. It has a memory function. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through wireless remote control. It can also be used as a synchronous controller. That is to say you can synchronously control number of decoders and LED lights.

Technical Parameters:

Interface Specifications

●  Connectthe load well wire at first,followingby the power wire; Please ensure short circuit can notoccur between connecting wire before you turn onthe power. Then set the steps as follows.

●  Pressthe "On / off" button to take the controller off before setting themenu.

●  Pressthe “up”, “down” button one time at the time, and LED would be bright at thismoment. Then press the "Mode / Speed" button to get into the menusettings screen.

●  Thefirst setting screen is for “High-speed, low-speed settings”, and the LED woulddisplay "S-HI" or "S-LO". Then press the “up” and “down”button to select the mode. (If the IC on the light bar is high-speed mode, youshould choose “S-HI”, and choose “S-HI” when low-speed.) The factory default isfor the high-speed mode.

●  Continueto press the "Mode / Speed" button to enter the secondscreen-“Control points setting”. The LED display 4-digit is for the number ofcontrol points. To plus or minus the number by pressing the “up” and “down”button (Long pressing can adjust quickly). The factory default is for 50.

●  Aftersetting well, press the "On / off" button to save and exit.

●  Synchronouscontroller system description

Synchronouscontrol system can be made of any number of controller connections. Each of thesub-controller would follow to the first master controller to achieve apermanent synchronous change. And there is not delay.

Afterconnecting the wiring diagram, the sub-controller need not be set. It will bein accordance with the master to controlling the speed and mode change. (Thatwould be not synchronous when powering. You could close and open to besynchronous) When master is working, and the sub-control working well, thegreen signal light of sub-control would flick. The digital LED display the modein operation.

Typical Applications:

   ApplicationCircuit1:

   ApplicationCircuit2, (Each controller can be individually powered, can also share power)

   Application of synchronization:

Notes:

1.Supply voltage of this product is DC12V-24V, never connect to others or AC220V.

2. WirelessRemote Control is powered by DC12V battery, if Stretch the antenna, it would Controlbetter.

3.Lead wire should be connected correctly according to grade that connectingdiagram offers.

4.If the load is more, by way of port 2 to connect the power will be better.

5.This product can not to overload;

6.Warrantyof this product is one year, but exclude the artificial situation of damaged oroverload working.