Plastic LED Panel 600x600mmModel: PL-0606- 4503
Available kits: 1. Normal On/off type 2. PWM+0-10V Dimmable 3. Movement Sensor+ Light sensor 4. Emergency Version
Backlit LED panel light is mainly intended to reducing enrgy consumption and landscaping.High brightness, soft light and no need for guide plate is the main characteriistic of this series of backlit panel. The high Lighting Efficency can up to 100-110lm/w. Easy to install and maintain to repllace the conventional lights, like fluorescent lamp, energy saving lamps, Down lights, etc. Especially applied for Office buildings, Supermarkets, Shopping malls, Conference halls, and Hotels etc, The warranty is three years. Our products are all strictly TUV/CE/RoHS approved.
Features and Advantages
1.Elegant appearance: no screws on the surface, smooth and tidy 2.Outstanding Heat Dissipation: help to reduce the luminous degradation and extent lifespan of products 3. High Lighting Transmittance Efficiency: up to 93% by imported diffuser from japan 4. High Lighting Efficiency: over 100lm/W by SMD 3014 LED 5. No start-up time, no flickering, no humming 6. No such hazard that mercury or lead enters the enviroument. No RF and electronic magnetic interferece 7. Over 50,000 hours life expectancy.
Technical Specificatuon A: Technical Parameter
B: Mechanical Specifications
C. Environmental
Packing information:
Compliance and Standards
1. Insulation Re si stance The IR shall be at least 50MΩ when apply 500V dc between primary and secondary
2. Dielectric Strength (Hi-pot) Input to Output 3750Vac 60Hz 1minute ≤3MA When AC voltage of 3.75KV is applied, and the voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage in 1s, and held at that value for 60s between the inputs.And output and bet ween the input and housi ng, the current sensiti vity shall be less than 5mA. After this test, the adapter shall exhi bit no electrical and m echanical abnorm alities.
3. Leakage Current The leakage current shall be less than 0.2mA for class ll when power supply is operated maximum input voltage and maximum load.
4. Safety Standard
IEC: 60598-1:2008 IEC61347-1/A1:2010 IEC61347-2-13:2006 IEC62031:2008
IEC62471:2006 IEC62471-2:2009:Passed EN60598-1/A11:2009 EN61347-2-13:2006 EN61347-1/A1:2011 EN62031:2008 EN62471:2008 EN61195:1999 EN62493:2010:Passed
5. EMI/EMS Standard
EN55015:Passed EN61000-3-2:Passed EN61000-4-2:Passed
6. Certificates TUV/CE/Ro HS
Application
• Offices • Kitchens • Bathrooms • Library • Department Store & Boutiques • Restaurant & Cafeteria • Conference Rooms • Hospital & Laboratory
ProductsSearchContact UsAddress: HYD Bld. 3rd Ind. Park, Tangxiayong, Songgang, Bao'an Dist., Shenzhen, China |
Home Page | About Us | Gallery | Contact Us | Feedback | Manager | | |
Copyright © 2023 Ledgor Lighting Technology All Rights Reserved |